Skuflo hardware test

Scanner test

Plug in or connect your barcode scanner, then scan the codes below. This page checks your scanner the same way Skuflo does on the factory floor, and it never sends anything anywhere. Everything happens in this browser tab.

Scan these

Most scanners work as a keyboard, so you do not need to click anything first. Just scan.

Barcode one, the hardware test code

Code128, the same format used on every Skuflo piece label
SKUFLO TEST 0001

Barcode two, the QR code

Scan the QR code on your printed test label
Use your printed test sheet for this one. Open Skuflo, go to Hardware, then Test label, and print it. The sheet has a QR code of the same test code as barcode one. Scan that QR code and check the result below matches exactly.

Barcode three, a real label code

Shaped like a normal Skuflo piece barcode, so you can check your prefix and spacing come through correctly
OAK 7KQ2M9XA

Live result

Scan a code above. Your last scan will appear here.
Average per character
Waiting
End key
Waiting
Characters read
Waiting
Total scans
0

Checklist

  • ?

    Scans fast

    Scan any barcode above to test scan speed.

  • ?

    Sends an end key

    Scan any barcode above to check for an end key.

  • ?

    Characters match exactly

    Scan barcode one or barcode three above.

  • ?

    Barcode read correctly

    Scan barcode one or barcode three above.

  • ?

    QR code

    We cannot always tell a QR scan from a barcode scan unless your scanner sends a symbology prefix. If you scanned the QR code from your printed test sheet and the result above read exactly SKUFLO TEST 0001, your QR reading works.

Camera mode

If your device has no scanner attached, your phone or laptop camera can read barcodes directly, in browsers that support it.

Skuflo scanner test. Runs entirely in your browser. Nothing you scan here is sent anywhere.